DefiXpress Defibrillator Technical Specification

Meditech Debrillator Monitor can work both in Automated External Debrillator (AED) mode and Manual mode and record parameters of ECG, HR and SpO2. Features: ·
Works both in automated external debrillator (AED) and Manual modes · Records ECG, HR and SpO2 · It has voice and visual prompts for charge prompt and shockable rhythm · It has a high-resolution display and a thermal printer

7 screen(17.7cm)diagonally
Sweep speed:
25mm/ sec
Number of leads for ECG:
3-lead ECG cable or 5-lead ECG cable, paddles
Energy sequence:
Monitor display indicates both selected and delivered energy
Charge time:
<7sec with a new fully charged battery
Charge prompts:
Voice and visual prompts
Electrode impedance measurement range:
Lead selection:
Displayed on monitor, paddles, I, II, III, AVR, AVL, AVF, V
ECG size:
0.25, 0.5, 1, 1.5, 2, 4 cm/mV display on monitor
Heart rate:
Heart rate alarm:
On/Off displayed on monitor, user-selectable
Smart alarm:
Beeper/voice prompts indicate shockable rhythm
SpO2 measurement range:
30~100%, ±2% between 80%~90%, others ±5%
Alarm range for SpO2 measurement range:
User set high limit and low limit
Alarm accuracy for SpO2 measurement range:
±10% within setting values
Alarm time accuracy for SpO2 measurement range:
Less than 12secs
Functions of AED mode:
Auto analyse and charge x3 with programmable auto energy level selection, screen prompts, and voice prompts
Shockable rhythms of AED mode:
Ventricular fibrillation with amplitude >=200uV ventricular tachycardia with rates >=140bpm QRS complex wave duration >=140ms
Charge control of AED mode:
Control on device front panel, press key on paddle
Prompts of AED mode:
Voice and visual prompts
Energy selection of Manual mode:
Selectable at 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules
Synchronization of Manual mode:
Synchronizes defibrillator pulse to patient's R-wave. ”SYNC” message displayed on monitor
Printer paper:
50mm thermal paper
Paper speed:
12.5mm/sec, 25mm/sec, 50mm/sec. User-selectable 6-second delay
Printing method:
High-resolution, thermal print head
Print-out modes:
Manual or automatic, user-configurable
On/Off control:
Front panel and paddle
Automatic function:
9-seconds recording initiated by alarm activation or defibrillator charge or defibrillator discharge
Rechargeable, Ni-MH battery, 12V
Battery life:
For a new, fully charged battery- 60 defibrillator discharges at maximum energy, or 3 hours minimum of continuous ECG monitoring. Additional parameters will effect operating time with different functions